All Categories

E-mail:[email protected]

EN

Company News

You Are Here : Home>News>Company News

Which type of rewinding shaft is used for the laminated roll material slitting machine?

Time :2021-06-04 Hits : 19

In the packaging and printing industry, we need to use many composite materials, such as aluminum foil paper composite, paper-plastic composite, and even three or four materials for composite. We call this composite process laminating. The material obtained by laminating multiple materials has characteristics that a single material does not possess. However, the thickness of these composite materials is uneven. When we cut and rewind these materials, the uneven thickness of each part causes the tension difference between the each after slitting rolls.

If you have high requirements on the quality of the rolls after slitting, and you want the slitting machine to run at high speed.Then the winding shaft of the slitting machine should adopt the friction shaft with ball. The differential rings on this type shaft can slip independently. Controlled by the tension system,let the compressed air which has a certain pressure come to axle core,so that will produce friction torque between friction parts and slipping rings,and realized constant tension coiling and it will help solve unwinding problems and material damaged caused by uneven thickness and tension of each rolls material.

Which type of rewinding shaft is used for the adhesive paper slitting machine of Binbao Machinery 1 副本
Which type of rewinding shaft is used for the adhesive paper slitting machine of Binbao Machinery 2 副本

Hot categories